Beaver Close Headroom Push Girder Trolleys

Beaver Close Headroom Push Girder Trolleys Beaver push girder trolleys are used for applications where reduced headroom is required.  The units suit varying flange widths up to a maximum of 350mm with the simple addition or subtraction of spacers or nuts on a suspension pin and are ideally suited to Beaver 3S Chain Blocks. 

These girder trolleys are lightweight, despite their robust all-steel construction and have been operationally tested to 150% of their rated capacity.

Note:-Beaver push close coupled trolleys are not designed for passenger elevator applications and must not be used for this purpose. Selection and calculation of the proper beam construction is the responsibility of the user. 

Features:

• Fully adjustable
• Anti-tilt blocks fitted as standard for additional safety
• Stainless steel ID plate for traceability

Approved Standards:

• Complies to AS 1418.2

Product Code	Rated Capacity	Colour Code	Proof Load	Minimum Radius Curve	Net Weight
522010SC	1t	Violet	14.71kN	0.9m	23.5kg
522020SC	2t	Green	29.42kN	1m	39kg
522030SC	3t	Yellow	44.13kN	1.2m	59.5kg

Each Beaver girder trolley has an individual serial number stamped on the stainless steel identification plate. This number coincides directly to the test certificate of the product (which is provided), for quick and easy tracing and reference. These products are also operationally tested to 150% of its rated capacity.
 

Product Code	Rated Capacity	A	B	C	H	S	F	M
522010SC	1t	303mm	246mm	164mm	385mm	38mm	1.5-3mm	64-203mm
522020SC	2t	317mm	276mm	183mm	480mm	38mm	1.5-3mm	88-203mm
522030SC	3t	435mm	332mm	224mm	520mm	40mm	1.5-3mm	100-305mm